Photo Above: Isotrpic Micro-Finishing Photography PHOTO CREDIT:  Mark, Riley, BV Products
by Dave Davidson – Deburring/Finishing Specialist
SME Manufacturing C248 – Spokane, Washington
Advisor: Machining/Material Removal Technical Community  |  509.230.6821 |

Positive vs. Negative Surface Skewness. The skew of surface profile symmetry can be an important surface attribute. Surfaces are typically characterized as being either negatively or positively skewed. This surface characteristic is referred to as Rsk (Rsk – skewness – the measure of surface symmetry about the mean line of a profilometer graph). Unfinished parts usually display a heavy concentration of surface peaks above this mean line, (a positive skew). It is axiomatic that almost all surfaces produced by common machining and fabrication methods are positively skewed. These positively skewed surfaces have an undesirable effect on the bearing ratio of surfaces, negatively impacting the performance of parts involved in applications where there is substantial surface-to-surface contact. Specialized high energy finishing procedures can truncate these surface profile peaks and achieve negatively skewed surfaces that are plateaued, presenting a much higher surface bearing contact area. Anecdotal evidence confirms that surface finishing procedures tailored to develop specific surface conditions with this in mind can have a dramatic impact on part life. In one example the life of tooling used in aluminum can tab stamping operations was extended 1000% or more by improved surface textures produced by mechanical surface treatment.

Directionalized vs. Random (Isotropic) Surface Texture Patterns. Somewhat related to surface texture skewness in importance is the directional nature of surface textures developed by typical machining and grinding methods. These machined surfaces are characterized by tool marks or grinding patterns that are aligned and directional in nature. It has been established that tool or part life and performance can be substantially enhanced if these types of surface textures can be altered into one that is more random in nature. Post-machining processes that utilize free or loose abrasive materials in a high energy context can alter the machined surface texture substantially, not only reducing surface peaks, but generating a surface in which the positioning of the peaks has been altered appreciably. These “isotropic” surface effects have been demonstrated to improve part wear and fracture resistance, bearing ratio and improve fatigue resistance.

Residual Tensile Stress vs. Residual Compressive Stress. Many machining and grinding processes tend to develop residual tensile stresses in the surface area of parts. These residual tensile stresses make parts susceptible to premature fracture and failure when repeatedly stressed. Certain high-energy mass finishing processes can be implemented to modify this surface stress condition, and replace it with uniform residual compressive stresses.

Super-Hone Edge Prep refers to a group a group of proprietary processes that improves edge condition and surface physical properties on tooling. The processes involve complete envelopment and processing of all edge and surface areas of the tool and are non-selective in nature. These processes develop surface compression and stress relief on all surfaces, as well as uniformly micro-honing and polishing all edge areas, regardless of tool or edge geometry.

Although the processes promote changes that are significant and crucial to improved tool performance, the changes in the physical cutting edge are so subtle that dimensional integrity of the tool is maintained. These alterations of the cutting edge surface area and supporting structures contributes to an improvement in mechanical strength and can avert premature wear or fracture of the tool.

The processes also have a tendency to improve overall symmetry of the cutting features, this is especially contrasted with manual honing methods, in which abrasive filament wheels, abrasive sticks or even coated abrasive paper are utilized to pre-condition edges by hand methods. Surface profile improvement is isotropic in nature, minimizing the fatigue and fracture problems associated with uni-directional surface patterns in surfaces created by production grinding methods. Smoother more isotropic surfaces provide greater lubricity for improved chip flow, often facilitating higher feed and speed rates with processed tools.

This edge conditioning procedure is an outgrowth of research to improve the tribological functionality of wear surfaces, with a view to extending useful service life and preventing premature failure of critical components that are highly stressed or strained. It has been found that surface treatment processes that can develop some measure of compressive stress and an isotropic micro-finish to edges and surfaces can improve load bearing ratios and other wear resistant factors far more than improvement in one of these areas alone.

When utilized to develop tool surface and edge improvements these processes can dramatically improve tool performance and maximize productivity in a number of areas:

o Greater tool life and durability
o Increased machine feed rates
o Increased tool speed rates
o Improved surface finish on parts
o Reduced tool change-over and downtime cycles due to break-in
o Improved tool performance meeting high tolerance requirements

The need for some edge preparation on cutting tools in many applications has been well documented. Most of the processes currently utilized (including manual ones) concentrate on modifying the edge to produce an edge land to strengthen the edge. Although these types of processes improve cutting edge geometries they do not typically address surface profile topography issues at the cutting edge such as profile skewness, isotropiciy, load bearing ratio and residual stress correction. Specialized high-energy methods can and do.

Summary. Many parts or tools that are subject to fatigue, fracture or wear can gain substantial improvements in life and performance from alterations to their overall surface texture. Improvements in overall smoothness, load bearing ratio, surface profile skewness and isotropicity can in many instances, improve life and performance and cut operational costs dramatically. Manufacturer s that have not subjected their parts to an analysis to determine the potential benefits of this kind of processing may be making parts “that are not all that they can be.”



One thought on “High Energy Micro-Finishing: Surface Textures and Surface Integrity for Precision Parts

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s