Vibratory Isotropic Finishing and Micro-Finishing

Vibratory Isotropic Finishing and Micro-Finishing

Mass media finishing processes have gained widespread acceptance in many industries primarily as a technology for reducing the costs of producing edge and surface finishes on manufactured components. This is particularly true when manual deburring and finishing procedures can be minimized or eliminated. Continue reading Vibratory Isotropic Finishing and Micro-Finishing

Centrifugal Isotropic Finishing Operations on Precision Parts [video]

Centrifugal Isotropic Finishing Operations on Precision Parts [video]

High-speed automated isotropic finishing and polishing for improved performance of precision parts Continue reading Centrifugal Isotropic Finishing Operations on Precision Parts [video]

Developments in Mass Finishing Technology

Developments in Mass Finishing Technology

Mass Finishing is a term used to describe a group of industrial processes by which large lots of manufactured parts can be processed in bulk economically to achieve a variety of surface effects. These economical processes, in contrast with hand deburring methods, develop these effects with a high degree of part-to-part and lot-to-lot uniformity and consistency. These effects might include edge break, edge contour, surface smoothing and improvement, tool mark blending, burnishing, polishing, super-finishing and micro finishing. Continue reading Developments in Mass Finishing Technology

Contract Finishing and Free Sample Part Processing for Centrifugal Isotropic Finishing and Polishing

Contract Finishing and Free Sample Part Processing for Centrifugal Isotropic Finishing and Polishing

If you have parts that need edge or surface finishing and would like to have FREE sample part processing and a quotation developed for finishing the parts please contact Dave Davidson at dryfinish@gmail.com Continue reading Contract Finishing and Free Sample Part Processing for Centrifugal Isotropic Finishing and Polishing

Tube Interior Micro-Finishing with Centrifugal Isotropic Finishing

Tube Interior Micro-Finishing with Centrifugal Isotropic Finishing

Modified centrifugal barrel finishing equipment is now being utilized to develop precision micro finishes on the interior of tubes and cavities for demanding applications such as particle accelerators. Continue reading Tube Interior Micro-Finishing with Centrifugal Isotropic Finishing

SME CONNECTIONS.  SME Member Introduction: Share Your Story (Sample)

SME CONNECTIONS. SME Member Introduction: Share Your Story (Sample)

SME Member: Share Your Story (Sample)

NOTE: Similar introductory summaries of SME members from across the country can be seen on the SME member forum at: http://connect.sme.org/home

YOUR INFORMATION: (to submit your story go to: http://www.sme.org/member-story/ Continue reading SME CONNECTIONS. SME Member Introduction: Share Your Story (Sample)

Isotropic Mass Finishing for Surface Integrity and Part Performance : Products Finishing

Isotropic Mass Finishing for Surface Integrity and Part Performance : Products Finishing

Moreover, the increased complexity and precision requirements of mechanical products have reinforced the need for accurately producing and controlling the edge and surface finish of manufactured parts. Variations in the surface texture can influence a variety of performance characteristics. The surface finish can affect the ability of the part to resist wear and fatigue; to assist or destroy effective lubrication; to increase or decrease friction and/or abrasion with cooperating parts; and to resist corrosion. Continue reading Isotropic Mass Finishing for Surface Integrity and Part Performance : Products Finishing