Photo above: Isotropic Micro-Finishing of Automotive components. (Photo: Mark Riley, BV Products) Mass Finishing Processes and Mechanical Surface Preparation For … Continue reading How can you produce high-quality edge and surface finishes on large lots of manufactured or machined parts uniformly and economically?
High-speed automated isotropic finishing and polishing for improved performance of precision parts Continue reading Centrifugal Isotropic Finishing Operations on Precision Parts [video]
Mass Finishing is a term used to describe a group of industrial processes by which large lots of manufactured parts can be processed in bulk economically to achieve a variety of surface effects. These economical processes, in contrast with hand deburring methods, develop these effects with a high degree of part-to-part and lot-to-lot uniformity and consistency. These effects might include edge break, edge contour, surface smoothing and improvement, tool mark blending, burnishing, polishing, super-finishing and micro finishing. Continue reading Developments in Mass Finishing Technology
If you have parts that need edge or surface finishing and would like to have FREE sample part processing and a quotation developed for finishing the parts please contact Dave Davidson at email@example.com Continue reading Contract Finishing and Free Sample Part Processing for Centrifugal Isotropic Finishing and Polishing
Moreover, the increased complexity and precision requirements of mechanical products have reinforced the need for accurately producing and controlling the edge and surface finish of manufactured parts. Variations in the surface texture can influence a variety of performance characteristics. The surface finish can affect the ability of the part to resist wear and fatigue; to assist or destroy effective lubrication; to increase or decrease friction and/or abrasion with cooperating parts; and to resist corrosion. Continue reading Isotropic Mass Finishing for Surface Integrity and Part Performance : Products Finishing
by Dr. Michael Massarsky | Turbo-Finish Corporation | 917.518.8205 | firstname.lastname@example.org and Dave Davidson | SME Technical Community Network | … Continue reading Dry Mechanical Edge and Surface Finishing for Rotating Aerospace Components
Feature Photo: Burrs are more than an industrial nuisance. They can be the source of significant problems when not properly … Continue reading “Compiled Problems Caused by Burrs and Sharp Edges.” [AEROSPACE INDUSTRY]